Question: In TCP, if the ACK value is 200, then byte _______ has been received successfully.
Answer:
In TCP, if the ACK value is 200, then byte 201 and all bytes before it have been received successfully.
The ACK value in a TCP segment is the next expected sequence number that the receiver is waiting for. It indicates the byte number that the receiver expects to receive next. In other words, the ACK value acknowledges the receipt of all data up to but not including the ACK value.
For example, if the receiver has successfully received bytes 1 to 200 and is expecting byte 201 next, then it will send an ACK segment with an ACK value of 201. If the sender receives this ACK segment, it knows that bytes 1 to 200 have been received successfully and can proceed to send the next segment starting from byte 201.
Therefore, if the ACK value is 200, it means that all bytes up to byte 200 have been received successfully, and the receiver is expecting byte 201 next.
MCQ: In TCP, if the ACK value is 200, then byte _______ has been received successfully.
Explanation:
In TCP, if the ACK value is 200, then byte 201 and all bytes before it have been received successfully.
The ACK value in a TCP segment is the next expected sequence number that the receiver is waiting for. It indicates the byte number that the receiver expects to receive next. In other words, the ACK value acknowledges the receipt of all data up to but not including the ACK value.
For example, if the receiver has successfully received bytes 1 to 200 and is expecting byte 201 next, then it will send an ACK segment with an ACK value of 201. If the sender receives this ACK segment, it knows that bytes 1 to 200 have been received successfully and can proceed to send the next segment starting from byte 201.
Therefore, if the ACK value is 200, it means that all bytes up to byte 200 have been received successfully, and the receiver is expecting byte 201 next.
Discuss a Question
Related Questions
- 1. In TCP, the _______ timer prevents a long idle connection between two TCPs.
- 2. In TCP, the _______ timer is needed to handle the zero window-size advertisement.
- 3. In TCP, Karn's algorithm is used in calculations by the _______ timer.
- 4. In TCP, a special segment called a probe is sent by a sending TCP when the _______ timer goes off.
- 5. __________ control refers to the mechanisms and techniques to keep the load below the capacity.
- 6. In TCP's ________ algorithm the size of the congestion window increases exponentially until it reaches a threshold.
- 7. In TCP's __________ algorithm the size of the congestion window increases additively until congestion is detected.
- 8. ________ treats the two signs of congestion detections, timeout and three duplicate ACKs, in the same way.
- 9. In ______ TCP, when the connection is established, TCP starts the slow start algorithms and sets the <em>ssthresh</em> variable to a pre-agreed value (normally 64 or 128 kilobytes) and the <em>cwnd</em> variable to 1 MSS.
- 10. The ___________ added a new state to the congestion control FSM, called the fast recovery state.
You may be interested in:
Computer Networking MCQsRecently Added Articles
How Can AI Simplify the Academic Life of Students?
Last updated on: April 16, 2025Posted by: ExamRadar
Want to Clear IBPS RRB PO? Master These Mock Test Hacks!
Last updated on: March 10, 2025Posted by: ExamRadar
Top AI Tools for Instantly Detecting Plagiarized Writing
Last updated on: December 5, 2024Posted by: ExamRadar
Applying Algorithmic Trading Techniques to Forex: Insights for Programmers and Data Scientists
Last updated on: November 22, 2024Posted by: ExamRadar
Image to Text Conversion Made Easy: Online Tool Insights
Last updated on: April 12, 2024Posted by: ExamRadar
