Question: In a Measurement System, the open loop transfer function is 10 and changes by 10 percent .if a closed loop system is adopted wherein the feedback system has a transfer function of 100. What will be the changes in output in the case of open loop and in closed loop systems?
Answer:
MCQ: In a Measurement System, the open loop transfer function is 10 and changes by 10 percent .if a closed loop system is adopted wherein the feedback system has a transfer function of 100. What will be the changes in output in the case of open loop and in closed loop systems?
Correct Answer:
A. 10%, 10×10<sup>-3</sup>%
Discuss a Question
Related Questions
- 1. In a permanent magnet moving coil type of ammeter, the current is I=kθ/NBAWhere θ=deflection, k=spring constant, N=numbers of turns of moving coil and B=flux density of the field produced permanent magnet .Temperature is an interfering input to the system. It is known that strength of magnets reduces by 0.02 per cent per °C and the strength of springs reduces by 0. 4 Percent per °C. Which methods should be adopted to apply corrections for the interfering input?
- 2. In a measurement systems, which of the following static characteristics are desirable
- 3. In Measurement systems, which of the following characteristics are undesirable static Characteristics?
- 4. A Pressure measurement instrument is calibrated between 10 bar and 250 bar. The Scale span of the instrument is
- 5. The output of an instrument under particular environmental conditions is given by the relationshipq<sub>0</sub>= a + bq<sub>i </sub>where q<sub>i </sub>= input and q and b are constants b<strong> ≠ 1, </strong>the theoretical input-output relationship is represented by a straight passing through zero. This is case of
- 6. A reading is recorded as 23.90 C<sup>0. </sup> The reading has
- 7. The scale of a 0-500V voltmeter is divided into ten large divisions representing 50 V each and each large division is further subdivided into 10 small divisions, each representing 5 V. it is used for measurement of output voltage of a potentiometer which can be varied from 0 to 500 v. it is observed that when the sliding contact is moved from its zero position, , there is no perceptible movement of pointer of the voltmeter till the sliding contact reaches a position where the output voltage should be 5 V. Therefore, it can be concluded that
- 8. In the center zero analog ammeter having a range of -10 A + 10 A, there is a detectable change of the pointer from its zero position on either side of the scale only if the current reaches a value of 1A(on either side).The ammeter has a
- 9. A Pressure gauge is calibrated from 0 -50 kN/m<sup>2 </sup>.it has uniform scale with 100 scale divisions. One fifth of scale division can be read with certainty.The gauge has a:
- 10. A d.c. circuit can be represented by an internal voltage source of 50 V.with an output resistance of 100KΩ. In order to achieve 99 percent accuracy for voltage measurement across its terminals, the voltage measuring device should have
You may be interested in:
Electrical and Electronics Measurements and Instrumentation MCQsRecently Added Articles
How Can AI Simplify the Academic Life of Students?
Last updated on: April 16, 2025Posted by: ExamRadar
Want to Clear IBPS RRB PO? Master These Mock Test Hacks!
Last updated on: March 10, 2025Posted by: ExamRadar
Top AI Tools for Instantly Detecting Plagiarized Writing
Last updated on: December 5, 2024Posted by: ExamRadar
Applying Algorithmic Trading Techniques to Forex: Insights for Programmers and Data Scientists
Last updated on: November 22, 2024Posted by: ExamRadar
Image to Text Conversion Made Easy: Online Tool Insights
Last updated on: April 12, 2024Posted by: ExamRadar
