Question: Power in d.c circuit is measured by measuring the voltage across and current through the circuit.The voltage and current measurements are made to an accuracy of ±2% and ±3% respectively. The errors are limiting errors. The error in measurement of power is:
Answer:
MCQ: Power in d.c circuit is measured by measuring the voltage across and current through the circuit.The voltage and current measurements are made to an accuracy of ±2% and ±3% respectively. The errors are limiting errors. The error in measurement of power is:
Correct Answer:
A. ±2%
Discuss a Question
Related Questions
- 1. The power in a circuit is measured by measuring a current through a resistor. The current is measured with an accuracy of ±1.5% and the tolerance band of resistor ±0.5%. the errors are limiting or guarantee errors. The accuracy with which power is measured is :
- 2. In an permanent magnet moving coil ammeter the deflection of the pointer is proportional to product of flux density of magnetic field produced by the permanent magnet and current in the moving coil. if the strength of permanent magnet becomes 95% of the original, The meter gives erroneous reading resulting into error. This error can be classified as:
- 3. The voltage of circuit is measured by a voltmeter having an input impedance comparable with the output impedance of the circuit thereby causing error in voltage measurement. This error may be called
- 4. The mean Deviation D in terms of deviation from the mean value of <em>n</em> reading is
- 5. A set of readings has a wide range and therefore it has:
- 6. The Gaussian distribution can be mathematically expressed as:
- 7. for a Gaussian distribution, the probable error is <em>r. </em>This means that:
- 8. Two resistances 100Ω ± 5Ω and 150Ω ± 15Ω are connected in series. If the deviations are standard deviations, the resultant resistance can be expressed as:
- 9. if the result of a measurement is expressed as x̅ ± 3σ where x̅ = mean value and σ = standard deviation ,it means that :
- 10. A batch of resistors have a mean value of 100 Ω and a standard deviation σ = 0.2 Ω. The probability corresponding to 2σ is 0.9546. The value of odds that randomly selected resistor will lie within 100.00 ± 0.40 Ω is:
You may be interested in:
Electrical and Electronics Measurements and Instrumentation MCQsRecently Added Articles
Top 5 Kahoot Winner Strategies Students Are Using Right Now
Last updated on: May 14, 2025Posted by: ExamRadar
Daily Routine to Cover the RBI Grade B Syllabus Fast
Last updated on: May 14, 2025Posted by: ExamRadar
How Can AI Simplify the Academic Life of Students?
Last updated on: April 16, 2025Posted by: ExamRadar
Want to Clear IBPS RRB PO? Master These Mock Test Hacks!
Last updated on: March 10, 2025Posted by: ExamRadar
Top AI Tools for Instantly Detecting Plagiarized Writing
Last updated on: December 5, 2024Posted by: ExamRadar
Applying Algorithmic Trading Techniques to Forex: Insights for Programmers and Data Scientists
Last updated on: November 22, 2024Posted by: ExamRadar
Image to Text Conversion Made Easy: Online Tool Insights
Last updated on: April 12, 2024Posted by: ExamRadar