Question: The resistance coil of a winding has a distributed capacitance of 9 pF. When wound in a single section. The same winding is sectionalized and is wound in three sections connected in series.The distributed capacitance of the winding with new arrangement is :
Answer:
MCQ: The resistance coil of a winding has a distributed capacitance of 9 pF. When wound in a single section. The same winding is sectionalized and is wound in three sections connected in series.The distributed capacitance of the winding with new arrangement is :
Correct Answer:
A. 9 pF
Discuss a Question
Related Questions
- 1. In order that value of an inductance standard should remain constant irrespective of the value of current carried by its coil :
- 2. In order that the values of effective resistance and inductance of a standard remain unaffected due to changes in frequency :
- 3. The value of effective inductance standard inductors at low and medium frequencies is approximately :
- 4. An imperfect capacitor is represented by a capacitance C<sub>p</sub>, in parallel with a resistance R<sub>p.</sub> the value of its dissipation factor (tan δ) is :
- 5. Capacitors with solid dielectric materials are used because :
- 6. The effective value of capacitance of standard capacitor at low and medium frequencies is
- 7. If an analog PMMC 0 – 10 A ammeter is provided with no controlling mechanism and the moving part are free to rotate, what will be the reading of the instrument if a current of 1 A (d.c) passed through the moving coil (the torque produced is sufficient to overcome the frictional losses)
- 8. A spring controlled instrument uses phosphor bronze springs to produce controlling torque. if the ratio of length of spring to thickness of spring is 3000 for a deflection 90°, what should be this ration if the scale is to extended to 120°
- 9. A voltage of 200 V produce a deflection of 90° in a PMMC spring controlled instrument. if the same instrument is provided with gravity control, what would be the deflection?
- 10. A spring produces a controlling torque of 16 × 10<sup>-6 </sup>Nm for a deflection of 120°. Suppose its width and length are made two times their original value and thickness is halved , the value of controlling torque for the same deflection will be :
You may be interested in:
Electrical and Electronics Measurements and Instrumentation MCQsRecently Added Articles
How Can AI Simplify the Academic Life of Students?
Last updated on: April 16, 2025Posted by: ExamRadar
Want to Clear IBPS RRB PO? Master These Mock Test Hacks!
Last updated on: March 10, 2025Posted by: ExamRadar
Top AI Tools for Instantly Detecting Plagiarized Writing
Last updated on: December 5, 2024Posted by: ExamRadar
Applying Algorithmic Trading Techniques to Forex: Insights for Programmers and Data Scientists
Last updated on: November 22, 2024Posted by: ExamRadar
Image to Text Conversion Made Easy: Online Tool Insights
Last updated on: April 12, 2024Posted by: ExamRadar
