Question: In a critically damped galvanometer the deflection at a time 0.9 times the time of free oscillations after a current is passed through the moving coil is approximately
Answer:
MCQ: In a critically damped galvanometer the deflection at a time 0.9 times the time of free oscillations after a current is passed through the moving coil is approximately
Correct Answer:
A. 0.986 times the final deflection
Discuss a Question
Related Questions
- 1. The resistance required for critical damping in a circuit is 1000Ω. The galvanometer circuit has a resistance of 800 Ω. Is the galvanometer circuit :
- 2. A galvanometer has a ratio of 0.9 for damped frequency oscillations to undamped frequency of oscillations. Suppose moment of inertia, stiffness constant and damping constant is made twice their original value that would be the new ratio of damped frequency oscillations to undamped frequency oscillations.
- 3. A circuit of 2 µ A is passed through the moving coil of an undamped d’Arsonval galvanometer which has a displacement constant of 2 Nm/A and a control constant of 10 ×10<sup>-6 </sup>Nm/rad. The moving oscillates with an amplitude of :
- 4. If the damping in the d’Arsonval galvanometer is only due to electromagnetic effects,the resistance required for critical damping is _________Where G = displacement constant ; Nm/A, K = control constant ; Nm/rad and J = inertia constant ; kg-m<sup>2</sup>.
- 5. A d’arsonval galvanometer uses a lamp and scale arrangement. Its current sensitivity is 250 mm/µ if the resistance of the coil is 100 Ω. And the external resistance required for critical damping is 900 Ω (which is connected in the circuit), the voltage sensitivity is
- 6. Ayrton shunt is used in d’Arsonval galvanometers so as to limit the current in the galvanometer coil to its maximum permissible value. The relative value of current through the galvanometer coil and the shunt
- 7. A ballistic galvanometer should be designed with
- 8. In a flux meter
- 9. In an unshunted flux meter,the sensitivity is dependent upon
- 10. A vibration galvanometer is to be turned to a frequency of 50 Hz. The ratio of its control constant to inertia constant should be
You may be interested in:
Electrical and Electronics Measurements and Instrumentation MCQsRecently Added Articles
How Can AI Simplify the Academic Life of Students?
Last updated on: April 16, 2025Posted by: ExamRadar
Want to Clear IBPS RRB PO? Master These Mock Test Hacks!
Last updated on: March 10, 2025Posted by: ExamRadar
Top AI Tools for Instantly Detecting Plagiarized Writing
Last updated on: December 5, 2024Posted by: ExamRadar
Applying Algorithmic Trading Techniques to Forex: Insights for Programmers and Data Scientists
Last updated on: November 22, 2024Posted by: ExamRadar
Image to Text Conversion Made Easy: Online Tool Insights
Last updated on: April 12, 2024Posted by: ExamRadar
